Anodized Aluminum Mounting Bracket Set for Automation Frames
A mixed set from one build: contoured mounting brackets with counterbored fixing holes, a black anodized cross bar, and a ribbed clamp block. Bead blasted and anodized, with the dowel and bolt positions as the controlling dimensions.
Material
Aluminum 6061-T6
Tolerance
Dowel and bolt positions ±0.02 mm
Process
CNC Milling
What This Part Does And What Matters On It
The function of the part, the features that carry the fit, and the requirements that decided how it was machined and checked.
A mixed set from one build: contoured mounting brackets with counterbored fixing holes, a black anodized cross bar, and a ribbed clamp block. The set is bead blasted and anodized, and the dowel and bolt positions are the controlling dimensions because the brackets locate an assembly against a frame.
Finishing a set together matters more than it sounds: parts from one assembly go through blasting and anodizing as one batch so the texture and colour match on the machine. Fit features are machined to a pre-coating size.
Send the frame pattern the brackets bolt to and say which faces are visible on the finished machine, so the cosmetic faces and the functional faces get the right treatment.
The Numbers That Control This Part
Process, material, finish, and the tolerances that were held. Send your own drawing and Owen quotes against the same list.
- Machining Process
- CNC Milling
- Part Type
- Block, Bracket
- Material
- Aluminum
- Material Grade
- 6061-T6
- Surface Finish
- Anodizing, Bead Blasting
- Critical Tolerance
- Dowel and bolt positions ±0.02 mm
- Industry
- Industrial Automation, Medical Devices
- Application
- Mounting brackets and clamp for an equipment frame
- Dowel position
- ±0.02 mm
- Counterbore depth
- ±0.05 mm
- Anodizing
- Clear and black, 10–15 µm
- Surface
- Bead blasted before anodizing
Have A Part Like This On Your Drawing?
Send the drawing with the material, quantity, and the tolerances your inspection actually checks. Owen reviews it against how this part was run and comes back within 24 hours on business days with a price, a lead time, and DFM notes before you commit to anything.
How This Part Was Machined
Set machined from one datum scheme; counterbores and dowel holes cut in the same setup as the outline. Parts bead blasted and anodized together so the finish matches across the set, with fit features at pre-coating size.
How This Part Was Checked
Dowel and bolt positions from the datum; finish consistency inspected side by side across the set.
Dowel and bolt positions from the datum face
Anodized colour and texture consistency across the set
Every Quote Comes With DFM Notes
Owen reads the drawing before pricing it: tolerances that add cost, features that need a second setup, finishes that change lead time. Send a STEP or PDF with the material and quantity, and the quote reflects what is actually machinable, within 24 hours on business days.
Similar Parts We Have Machined
Same industry or same process. Material, process, and application on every card.
Machined Laminate Insulator Bracket Set
- Process: CNC Milling
- Material: Engineering Plastics
- Industry: Electronics & Robotics, Medical Devices
Anodized Rail Housing, Slide Bar and Contoured Link Set
- Process: CNC Milling
- Material: Aluminum
- Industry: Electronics & Robotics, Industrial Automation
Turned Flanged Shaft with Threaded Section and Matching Retainer Rings
- Process: CNC Milling, CNC Turning
- Material: Stainless Steel
- Industry: Industrial Automation, Medical Devices
Perforated Carrier and Nest Plate Set for Component Arrays
- Process: CNC Milling
- Material: Aluminum
- Industry: Medical Devices, Semiconductor
Anodized Aluminum Fork Transfer Plate for Substrate Handling
- Process: CNC Milling
- Material: Aluminum
- Industry: Industrial Automation, Semiconductor
Robot End-of-Arm Transfer Gripper Assembly with Urethane Contact Pads
- Process: CNC Milling
- Material: Aluminum
- Industry: Electronics & Robotics, Industrial Automation
Material Certificates And Inspection Reports Travel With The Parts
Tell Owen which records your receiving inspection needs: mill certificates, first article report, CMM report, certificate of conformance, or all of them. They are agreed at quoting, not requested after the parts arrive.
Have A Similar Part? Send The Drawing.
A STEP, IGES, or PDF file with the material, quantity, and the tolerances that matter is enough to start. You get a price, a lead time, and manufacturability feedback from a real person, not a bot.
Owen Lan
Sales, Zhongjiecheng Auto
Replies within 24 hoursEvery message from this page reaches me directly. If your part looks anything like the one above, tell me the material, the quantity, and the dimensions you care about most, and I will tell you how we would run it and what it costs.
Prototypes and production runs both welcome. Tolerances, finishes, inspection records, and packing are confirmed before you pay a deposit.
Owen Lan
Sales, Zhongjiecheng Auto CNC Machining
Tell Us About Your Parts
Fields marked * are required.