Slotted Carrier Block with Wire-Cut Comb Profile
One of a batch of eight identical blocks: a deep open-ended slot with a row of small square notches down both walls, a keyway groove, two bushed holes and a raised tongue on the back face. Checked as a set, on a granite plate.
Material
Carbon Steel S45C
Tolerance
Notch pitch ±0.02 mm, slot width ±0.02 mm
Process
CNC Milling, Wire EDM
What This Part Does And What Matters On It
The function of the part, the features that carry the fit, and the requirements that decided how it was machined and checked.
One of a batch of eight identical blocks: a deep open-ended slot with a row of small square notches down both walls, a keyway groove, two bushed holes and a raised tongue on the back face. The block is milled and the notch profile along the slot walls is wire cut, because the notches are smaller than a cutter can reach into.
On a batch like this the set is the deliverable. The blocks were measured together on the granite plate and the notch pitch was checked along each slot, so that any one of the eight interchanges with the others in the assembly.
If you are specifying a similar carrier, tell us the pitch across the whole notch row and the fit the tongue and bushed holes have to make; those decide the process split between milling and wire EDM.
The Numbers That Control This Part
Process, material, finish, and the tolerances that were held. Send your own drawing and Owen quotes against the same list.
- Machining Process
- CNC Milling, Wire EDM
- Part Type
- Block, Carrier
- Material
- Carbon Steel
- Material Grade
- S45C
- Surface Finish
- As Machined
- Critical Tolerance
- Notch pitch ±0.02 mm, slot width ±0.02 mm
- Industry
- Automotive, Electronics & Robotics
- Application
- Carrier block for a component handling unit
- Notch pitch
- ±0.02 mm
- Slot width
- ±0.02 mm
- Bushed hole
- H7 for press-fit bushing
- Surface roughness
- Ra 1.6
Have A Part Like This On Your Drawing?
Send the drawing with the material, quantity, and the tolerances your inspection actually checks. Owen reviews it against how this part was run and comes back within 24 hours on business days with a price, a lead time, and DFM notes before you commit to anything.
How This Part Was Machined
Blocks milled as a batch of eight from one setup; the notch row along the slot walls is wire cut because the notches are smaller than a cutter can reach. Bushed holes reamed for a press fit.
How This Part Was Checked
The eight blocks measured together on the granite plate; notch pitch checked along each slot; slot width with pin gauges.
Slot depth, tongue height and set consistency
Slot width and notch pitch
Every Quote Comes With DFM Notes
Owen reads the drawing before pricing it: tolerances that add cost, features that need a second setup, finishes that change lead time. Send a STEP or PDF with the material and quantity, and the quote reflects what is actually machinable, within 24 hours on business days.
More Photographs Of The Finished Part
Surfaces, edges, and features after machining and finishing. Click any image to open it at full size.
Similar Parts We Have Machined
Same industry or same process. Material, process, and application on every card.
Machined Laminate Insulator Bracket Set
- Process: CNC Milling
- Material: Engineering Plastics
- Industry: Electronics & Robotics, Medical Devices
Anodized Rail Housing, Slide Bar and Contoured Link Set
- Process: CNC Milling
- Material: Aluminum
- Industry: Electronics & Robotics, Industrial Automation
Contoured Five-Spoke Wheel Hub with Notched Rim Barrel
- Process: CNC Milling, CNC Turning
- Material: Carbon Steel
- Industry: Automotive
Wire-Cut Blade Insert Set for Connector Stamping Tooling
- Process: CNC Milling, Wire EDM
- Material: Tool Steel
- Industry: Automotive, Electronics & Robotics
Ganged Wire-Cut Die Insert Bar with Seventeen Positions
- Process: CNC Milling, Wire EDM
- Material: Tool Steel
- Industry: Automotive, Electronics & Robotics
Robot End-of-Arm Transfer Gripper Assembly with Urethane Contact Pads
- Process: CNC Milling
- Material: Aluminum
- Industry: Electronics & Robotics, Industrial Automation
Material Certificates And Inspection Reports Travel With The Parts
Tell Owen which records your receiving inspection needs: mill certificates, first article report, CMM report, certificate of conformance, or all of them. They are agreed at quoting, not requested after the parts arrive.
Have A Similar Part? Send The Drawing.
A STEP, IGES, or PDF file with the material, quantity, and the tolerances that matter is enough to start. You get a price, a lead time, and manufacturability feedback from a real person, not a bot.
Owen Lan
Sales, Zhongjiecheng Auto
Replies within 24 hoursEvery message from this page reaches me directly. If your part looks anything like the one above, tell me the material, the quantity, and the dimensions you care about most, and I will tell you how we would run it and what it costs.
Prototypes and production runs both welcome. Tolerances, finishes, inspection records, and packing are confirmed before you pay a deposit.
Owen Lan
Sales, Zhongjiecheng Auto CNC Machining
Tell Us About Your Parts
Fields marked * are required.